How To Level A Floor
Floor leveling is a process used to smooth rough concrete surfaces. This process is generally required when installing new carpet, laminate or floor tiles over uneven floorboards. If your current floor is not properly leveled, you will only be disappointed when installing these. Don’t do this. If you want professional results, use a spirit level to check the floor slope and, if needed, level it with a leveling compound.
Easy DIY Guide To Leveling A Floor
Learning how to level a floor is not that hard, provided that you have the right materials. Here’s how to do it:
Step 1 – Applying the Bonding Agent
You will need to apply a bonding agent to your existing concrete floor so that the underlayment adheres properly. You can find latex bonding agents along with other flooring products at every home improvement stores. Before applying, however, make sure to remove any debris and dust particles from your floor. You can use a cheap brush to apply the latex bonding agent around the corners and finish the room with a mop. Next, we’ll learn how to level a floor using a specific compound.
Step 2 – Mixing and Pouring
The compound used to level flooring dries very quickly, so you need to be careful when mixing or pouring it. The process of mixing and pouring is best managed by multiple people, so you might want to recruit some family members or friends to help. One group can mix the leveler, while another can bring it inside and pour it over the floor. Establishing a proper routine is one of the most important things about how to level a floor.
Step 3 – How to Pour the Floor Leveler
It’s best to pour the floor leveler slowly over the floor. Start with one corner and slowly work your way to other areas of the room until it’s fully covered. What’s great about floor levelers is that they find their own way into the right spots – you don’t even have to do a lot of work! If you notice any lumps, you can smooth them out with a garden rake. To avoid problems like this, it’s very important to mix the product properly until you get the right consistency.
Step 4 – Fix Blemishes
Another thing that you need to keep in mind when learning how to level a floor is that you will likely notice small holes and/or ridge lines after leveling a larger room. You can fix these by using a new compound and spreading it with a trowel. Just mix the underlayment with an acrylic additive and start fixing any problems that you notice.
Step 5 – Choose the Sub-Flooring
Now that the area is flat and leveled, the last step to learning how to level a floor is choosing and installing the sub-flooring. Sub-flooring isn’t 100% necessary as you can also use a floating floor instead, but, it’s very important if you want as much insulation value as possible. One of the most common subfloor materials is plywood, but the type of subfloor that you actually need is determined by what flooring material you want to use.